Shop Online : Ouvert du Lundi au Vendredi 13H30 19H00 : Ferme Samedi Dimanche : TEL.09.50.76.76.85
Panier
 1 x  217322 Halo Carbon Fibre Tail Rotor Blade Set 105mm
 1 x  H45Z002XXT 450L Linkage Ball Set
 1 x  28701000 Crankcase 105HZ
 1 x  PS0020 YS Number 2 Glow Plug
 1 x  27381940 Needle Valve Holder Assembly
 1 x  28704000 Heatsink 105HZ
 1 x  305-565 Tail Control Rod 565mm E5
 1 x  26606008 Piston Pin 105HZ 91HZ
 1 x  28704160 Head Gasket 0.2T 105HZ
 1 x  HS1230 One-way Bearing Shaft Collar/thickness:1.6mm
 1 x  28702000 Crankshaft 105HZ
 1 x  E6-999-306 - Synergy E6/7 Flybarless Kits
 1 x  29081720 Carburetter Retainer 61B Carb OS 91 HZ
 1 x  28707000 Cover Plate 105HZ
 1 x  RH25E03XT T-REX 250 PLUS DFC BTF
 1 x  27681340 Mixture Control Valve Stop Screw
 1 x  106-810 Fuel Tank Stopper Grommet
 1 x  109-103 10x14x3 Brass Spacer
 1 x  107-106 Synergy 3x4.5mm Pivot Ball Set (5)
 1 x  108-166 One-Way Clutch Bearing 16x22x16
 1 x  TL2744 JST-XH 6S AB Clip Balance Plug Savers
 1 x  LX1044 Lynx Heli Stretch Super Combo Red With 275mm Main Blade 300X
 1 x  110-170 Cooling fan
 1 x  BLH1857 Tail Boom (2)
 1 x  OPRLED Optipower ULTRA-GUARD 430 Back Up Solution Replacement LED Flash Alarm
 1 x  SPMR9900EU Spektrum DX9 Transmitter Only Mode 2
 1 x  27881800 Mix Control Valve O Rings
 1 x  BLH7780 E-Flite 200 QX Brushless BnF
 1 x  MH-MCPX015C Microheli 3mm Carbon Tail Boom (for MCPX024/H)
 1 x  R90N835-SS OUTRAGE ELEVATOR BELL CRANK ASSEMBLY - VELOCITY 90
 1 x  MH-MCPX025L Microheli Tail Motor Mount w/Vertical Fin set
 1 x  JRH61641 Head Button

Sous-total : 2 239,97€
TVA 20.0: 447,99€
Total : 2 687,97€
 
Marques
 
Stock labels

En stock

Stock faible

Hors Stock

 
Newsletter
Souscrivez à notre newsletter pour recevoir les infos, actus et les dernières nouveautés de PSLV !

Entrez votre email:

Ajouter


Enlever clic ici

 

HES45X01 RCE-BL45X Brushless ESC With Governer Mode

HES45X01 RCE-BL45X Brushless ESC With Governer Mode
Les photos sont donne a titre indicatif et non contractuel
Cliquer pour agrandir
Prix :56,42€
Disponibilité : En Stock
Modèle : HES45X01
Fabricant : ALIGN

RAPPEL : Vous disposez d'un délai de rétractation de 14 jours à compter de la réception du/des produit(s).

Quantité :  Ajouter au panier
Product:
Package:
Instructions: Specification:
Fearture:
●BEC output voltage(5~6V) to show great performance on the torque & speed of servo.
●BEC output utilizing switching power system,suitable for 2S~6S Li battery,with continuous current rating of 3A,and burst rating of 6A.
●Three programmable throttle speed settings to support quick throttle response.
●Govener Mode(governor speed controller、slow down system).
●Small and compact PCB design for ease of installation.
●Large heatsink for great thermal performance.
●High compatibility to work with 98% brushless motors in the market.
●Ultra smooth motor start design to run with all kinds of brushless motors.
●The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
●The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
●Users can use the transmitter to operate the motor setting by Super stylized CPU.
●If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.
●Contimuous current:45Amps 
●Surge current:60Amps for 15seconds
●Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
●Supporting maximum RPM:2poles=>190,000rpm
●Supporting maximum RPM:6poles=>63,000rpm
●Supporting input voltage:2S~6S
●Supporting battery types: Li-ion/ Li-poly 2~6 cells
●BEC output: 5~6V,current 3A
●Size:58X29.3X21mm
●Weight:47g
Accessories:
plus
●ALIGN standard 3mm socket terminal X3pcs(Max. current 50A)
●Heat shrink tube x 3 PCS(Φ4x25mm)
Il n'y a aucune image supplémentaire pour ce produit.

**Ces délais sont également dépendants de ceux affichés dans la fiche produit (articles sur commande par exemple, voir le nombre de jours pour la livraison), en cas de doute contactez-nous.
 
Loi Châtel du 01/06/08
Conformément à la loi, en cas de retard de plus de 7 jours, vous pourrez annuler votre commande et toutes les sommes versées seront remboursées dans les 30 jours.